PMM TRUCKLINE
Winch

Truck-mounted wireline winch with customizable
power and chassis for production and reservoir use

  • Home / UDT Truckline Connector

Truckline Winch Unit Onshore Operations

UDT make truckline unit is a truck mounted wireline winch unit consisting of reel skid and power skid suitably mounted on right hand 6×4 drive truck chassis delivering power from 180 HP to 420 HP.
OPERATIONS AND AREA OF USAGE
These units are used in onshore areas (Rig safe zones) and can be used for production and reservoir operations.
DIMENSIONS AND WEIGHT
Dimensions and Weights can be customized depend on the Truck chassis selected for manufacturing of Winch unit.

Key features of all UDT TRUCKLINE Connector

Truck-mounted
mobility

High-horsepower
output

Customizable
dimensions

Slickline
compatible

Large-drum
capacity

Hydraulic-motor
drive

Chain-sprocket
transmission

Over-pull
protection

Heavy-duty
reliability

WINCH SYSTEM

  • Slickline 0.092″, 0.108″, 0.125″.
    Drum capacity-25,000 ft.
  • Winch drum is driven by hydraulic motor via planetary gearbox with chain sprocket system.
  • Fail safe positive brake.
  • Over-pull shut-down system: stop winch rotation on preset desired over pull.
  • Equivalent to ASEP Spooling arm or overhead spooling arm.
  • Closed loop hydraulic system.
  • Truck PTO driven hydraulics.
  • Effective fast acceleration and extremely high speeds for effective jarring.
  • Hydraulic tank-250 litres.
  • Diesel engine driven hydraulic power pack.
  • Engine make: JCB, Perkins, Cummins and Caterpillar as per application requirement.
  • Engine rating 84hp or 125 hp as per application requirement.
  • Battery starter and 12 VDC Alternator.
  • 10 KVA Hydraulic generator.
  • Spark Arrestor type muffler at exhaust.
  • Suitable air inlet emergency shut down valve with integral flame trap.
  • Crankcase breather flame arrester.
  • Compact & light weight two or three wheel wrap-around design and no change of wheel is required with the change of wire
    Make: Benchmark or equivalent.

  • Wire or cable can be removed from measuring head without cutting the wire
  • Digital data recorder and display that displays and record real time depth tension and line speed, data can be downloaded to a USBfor further data processing.
  • Alarm setting allow operator to set alarm to pre-determined value of depth and tension. If operator does not take any action the winch should stop automatically at a preset value.
    Make: Benchmark or equivalent.
  • Mechanical back up depth counter
  • Back up hydraulic line pull indicator: Make: Martin Decker or equivalent.
  • Max line speed at core-1600 ft/min
  • Max line speed at rim/surface-2700 ft/min
  • Max line pull at core – 14000 lbs
  • Max line pull at rim/surface-7055 lbs
  • Line speed and line pull can be customised.
  • Ergonomic operator chair and operator console
  • Air-Conditioned operator cabin.
  • 2 persons additional seat
  • Talk back system coupled with Speaker for communication from operator cabin to operational area

Pipe Table

Pipe Nominal OD
(in)		 (mm) Pipe Wall Thickness
(in)		 (mm) Grade X-52 Grade X-56
Tension Yield
(kips)		 Bending Yield
(kips.ft)		 Burst Pressure
(psi)		 Collapse Pressure
(psi)		 Tension Yield
(kips)		 Bending Yield
(kips.ft)		 Burst Pressure
(psi)		 Collapse Pressure
(psi)
18.6254730.435111300481213863814005182302638
205080.43811.11398558199151415066012144514
205080.512.71593631227577217156802450772
205080.62515.9197877428441415213083430631449
205080.81220.62547978369724512743105439812518
20508125.431041170455039043343126049004089
24610125.437571729379226124046186240832692
266600.7519.130941582262511653332170428271182
26660125.440842049350021634398220637692252
30762125.447382770303316315102298332671681
307621.538.169843950455039047521425449004089
36914125.457184057252810546158436927221063
369141.538.184545834379226129104628340832692
36914250.81111074575056476611960803154445021

Connector Table

Pipe Connector Table
Type Material Yield
(ksi)		 Pipe Nominal OD Pipe Wall Thickness Connector OD Connector ID Make Up Length Tension Yield Bending Yield Burst Pressure Collapse Pressure Make Up Torque
(in)(mm) (in)(mm) (in)(mm) (in)(mm) (in)(mm) klpsMN (kips.ft)(MNm) (psi)(MPa) (psi)(MPa) (kips.ft)(kNm)
SIF7018.6254730.4351119.9150617.76451820314776.65470.72900207445.118 to 2424.4 to 32.5
SDIF8018.6254730.4351119.9150617.76451820316857.56240.8330022.6868618 to 2424.4 to 32.5
S70205080.43811.121.1953818.754708.7522220999.38371.1230015.96004.120 to 2627.1 to 35.3
SIF70205080.512.721.8255419.124868.7522220999.38371.1230015.96004.120 to 2627.1 to 35.3
S70205080.512.721.1953818.54708.75222227010.19001.2270018.69016.220 to 2627.1 to 35.3

UDT Complete Line of Wireline

UDT Product Comparison Carousel

UDT Truckline

UDT make Truckline unit is a truck mounted wireline winch unit consisting of reel skid and power skid suitably mounted on right hand 6x4 drive truck chassis delivering power from 200 HP to 420 HP

Truckline

UDT SCRAPPING WINCH

The UDT Scrapping Winch is a robust, efficient solution for heavy-duty lifting and material handling, ensuring safety, reliability, and smooth operation in industrial and marine applications.

UDT Flyline

UDT make Skid mounted one or two piece wireline unit comprising power pack module with 84-125 hp diesel engine and winch unit. This is compact , versatile, self-contained.

UDT Survey Line

This is a skid mounted, self contained, steel skid base structure, single drum wireline unit designed to provide a light weight, compact winch for performing light duty.

UDT Survey Line

UDT Slim Split

UDT make Skid mounted one or two piece wireline unit comprising power pack module with 84-125hp diesel engine and winch unit. This is compact versatile, self-contained wireline winch.

UDT Slim Split

PMM TELESCOPIC

PMM Telescopic Mastline units are self-contained, land-based systems with ample storage, capable of transporting all pressure control equipment, including grease injection units, lubricator risers, and BOP, to the well.

Telescopic
Scroll to Top