PMM FLYLINE
Connectors
Compact, versatile, self-contained unit for onshore and
offshore production and reservoir operations
offshore production and reservoir operations
- Home / UDT FLYLINEConnectors
Skid-Mounted Wireline Winch Unit
PMM make skid mounted one or two piece wireline unit comprising power pack module with 84-125 hp diesel engine and winch unit. This is compact, versatile, self-contained wireline winch unit may be supplied in single or dual drum configuration.
OPERATIONS AND AREA OF USAGE
These units can be used in both offshore and onshore areas (in both Zone-2 & Rig safe zones) and can be used for production and reservoir operations..
DIMENSIONS AND WEIGHT (for single drum unit) (approx.)
Reel Skid: Length = 2.2m Width = 1.4m . Height = 1.7m
Power Skid: Length = 2m Width = 1.5m , Height = 1.5m
Weight of Reel skid=2000 kg, Weight of Power skid=2000 Kg
dimensions and weights can be customized.
Key features of all PMM FLYLINE Connectors
Quick-turn
fitment
Anti-rotation
built-in
High-pressure
sealing
High-strength
design
Rapid
make-up
Stronger than
casing
Cross-thread
prevention
Field proven
reliability
Full-fitment
testing
WINCH SYSTEM
- Slickline 0.092″, 0.108″, 0.125″.
Drum capacity-25, 000 ft. - Winch drum is driven by hydraulic motor via planetary.
- Gearbox with chain sprocket system.
Fail safe positive brake. - Over-pull shut-down system: stop winch rotation on preset desired over pull.
- Equivalent to ASEP Spooling arm or overhead spooling arm.
- Closed loop hydraulic system.
- Effective fast acceleration and extremely high speeds for effective jarring.
- Hydraulic tank-150 litres.
- Diesel engine driven hydraulic power pack.
- Engine make: JCB, Perkins, Cummins and Caterpillar as per application requirement.
- Engine rating 84hp or 125 hp as per application requirement.
- Battery starter and 12 VDC Alternator.
- Spark Arrestor type muffler at exhaust.
- Suitable air inlet emergency shut down valve with integral flame trap.
- Crankcase breather flame arrester.
- Compact & light weight two or three wheel wrap-around design and no change of wheel is required with the change of wire.
- Make: Benchmark or equivalent.
- Wire or cable can be removed from measuring head without cutting the wire.
- Digital data recorder and display that displays and record real time depth tension and line speed, data can be downloaded to a USB for further data processing.
- Alarm setting allow operator to set alarm to pre-determined value of depth and tension. If operator does not take any action the winch should stop automatically at a preset value.
- Make: Benchmark or equivalent.
- Mechanical back up depth counter.
- Back up hydraulic line pull indicator:
Make: Martin Decker or equivalent.
- Max line speed at core-1600 ft/min
- Max line speed at rim/surface-2700 ft/min
- Max line pull at core-9000 lbs
- Max line pull at rim/surface-5000 lbs
- Line speed and line pull can be customised.
- Hydraulic double lever joystick for drum rotation, pump and motor displacement control.
- Engine Throttle Control.
- Hydraulic Pressure Gauges.
- Brake Control.
- Spooling arm and side shift control.
Pipe Table
| Pipe Nominal OD (in) |
(mm) | Pipe Wall Thickness (in) |
(mm) | Grade X-52 | Grade X-56 | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Tension Yield (kips) |
Bending Yield (kips.ft) |
Burst Pressure (psi) |
Collapse Pressure (psi) |
Tension Yield (kips) |
Bending Yield (kips.ft) |
Burst Pressure (psi) |
Collapse Pressure (psi) |
||||
| 18.625 | 473 | 0.435 | 11 | 1300 | 481 | 2138 | 638 | 1400 | 518 | 2302 | 638 |
| 20 | 508 | 0.438 | 11.1 | 1398 | 558 | 1991 | 514 | 1506 | 601 | 2144 | 514 |
| 20 | 508 | 0.5 | 12.7 | 1593 | 631 | 2275 | 772 | 1715 | 680 | 2450 | 772 |
| 20 | 508 | 0.625 | 15.9 | 1978 | 774 | 2844 | 1415 | 2130 | 834 | 3063 | 1449 |
| 20 | 508 | 0.812 | 20.6 | 2547 | 978 | 3697 | 2451 | 2743 | 1054 | 3981 | 2518 |
| 20 | 508 | 1 | 25.4 | 3104 | 1170 | 4550 | 3904 | 3343 | 1260 | 4900 | 4089 |
| 24 | 610 | 1 | 25.4 | 3757 | 1729 | 3792 | 2612 | 4046 | 1862 | 4083 | 2692 |
| 26 | 660 | 0.75 | 19.1 | 3094 | 1582 | 2625 | 1165 | 3332 | 1704 | 2827 | 1182 |
| 26 | 660 | 1 | 25.4 | 4084 | 2049 | 3500 | 2163 | 4398 | 2206 | 3769 | 2252 |
| 30 | 762 | 1 | 25.4 | 4738 | 2770 | 3033 | 1631 | 5102 | 2983 | 3267 | 1681 |
| 30 | 762 | 1.5 | 38.1 | 6984 | 3950 | 4550 | 3904 | 7521 | 4254 | 4900 | 4089 |
| 36 | 914 | 1 | 25.4 | 5718 | 4057 | 2528 | 1054 | 6158 | 4369 | 2722 | 1063 |
| 36 | 914 | 1.5 | 38.1 | 8454 | 5834 | 3792 | 2612 | 9104 | 6283 | 4083 | 2692 |
| 36 | 914 | 2 | 50.8 | 11110 | 7457 | 5056 | 4766 | 11960 | 8031 | 5444 | 5021 |
Connector Table
| Type | Material Yield (ksi) |
Pipe Nominal OD | Pipe Wall Thickness | Connector OD | Connector ID | Make Up Length | Tension Yield | Bending Yield | Burst Pressure | Collapse Pressure | Make Up Torque | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| (in) | (mm) | (in) | (mm) | (in) | (mm) | (in) | (mm) | (in) | (mm) | klps | MN | (kips.ft) | (MNm) | (psi) | (MPa) | (psi) | (MPa) | (kips.ft) | (kNm) | ||
| SIF | 70 | 18.625 | 473 | 0.435 | 11 | 19.91 | 506 | 17.76 | 451 | 8 | 203 | 1477 | 6.6 | 547 | 0.7 | 2900 | 20 | 744 | 5.1 | 18 to 24 | 24.4 to 32.5 |
| SDIF | 80 | 18.625 | 473 | 0.435 | 11 | 19.91 | 506 | 17.76 | 451 | 8 | 203 | 1685 | 7.5 | 624 | 0.8 | 3300 | 22.6 | 868 | 6 | 18 to 24 | 24.4 to 32.5 |
| S | 70 | 20 | 508 | 0.438 | 11.1 | 21.19 | 538 | 18.75 | 470 | 8.75 | 222 | 2099 | 9.3 | 837 | 1.1 | 2300 | 15.9 | 600 | 4.1 | 20 to 26 | 27.1 to 35.3 |
| SIF | 70 | 20 | 508 | 0.5 | 12.7 | 21.82 | 554 | 19.12 | 486 | 8.75 | 222 | 2099 | 9.3 | 837 | 1.1 | 2300 | 15.9 | 600 | 4.1 | 20 to 26 | 27.1 to 35.3 |
| S | 70 | 20 | 508 | 0.5 | 12.7 | 21.19 | 538 | 18.5 | 470 | 8.75 | 222 | 2270 | 10.1 | 900 | 1.2 | 2700 | 18.6 | 901 | 6.2 | 20 to 26 | 27.1 to 35.3 |
